Model DM600-10 Discontinuity Monitor is a 6 channel test instrument
designed to meet or exceed the requirements of MIL-STD-1344A
MIL-C-26500C, MIL-C-39012B for monitored vibration or shock of
electrical connectors and or assemblies. The monitor detects for
interruptions of circuit continuity of 1.0usec or greater with a test
current of 100mA. The unit utilizes digital logic for all time measurements. No RC time constants or calibration controls are required.
SPECIFICATIONS:
No of channels:-----6 (rear panel selectable 1 thru 6).
Test current:---------1.0mA to 100mA adjustable with FP ten turn dial.
Current setting-------+/-1% of dial setting or +/-0.2mA.
Regulation:------------+/-1% for +/-10% line variation.
Compliance voltage-Open circuit +/- 1.50 VDC nominal.
Detection circuits. Non-accumulative digital counters with maximum
reading and storage registers.
Accuracy:----------------Time uncertainty, +/- 50nsec.
Fault displays> 0.1usec (Green LED), > 1.0usec (Amber LED),
> 10.0usec (Red LED).
Clock: 10MHz TTL Oscillator. +/- 0.01%.
Calibrator: Saturated open collector gated transistor with one shot
pulse generator.
Price: DM600-10 $2,200 , DM600-10A $2,450, (Relay output).
